Golf VR32 interior conversion

We supplied and fitted a set of custom instrument clusters which were to be installed in a show standard MK3 VR32. So called a VR32 as this MK3 was once a VR6 however it now has a MK4 .:R32 engine fitted (3.2 litre) with some one off touches.

The owner contacted the vagwerkes team to source the parts required for the dash conversion

Initially, the cluster conversion was not as straightforward as it seems. A custom wiring loom was made as well as sourcing fuel and oil sensors which ensured all readings on the instrument cluster were correct and to a standard where we were happy with promoting. No corners were cut in the interior conversion

The car was then given to Rams Customs for the remaining interior conversion which consisted of:

R32 Seats
MK4 Dashboard (modified to fit MK3)
R32 original Aluminium trim
Original Heated seat switches
R32 Steering wheel with airbag
Climatronic unit

We were contacted throughout the conversion to advise on the wiring and assist in the installation

The finished article was very impressive

We will let the pictures do the talking!

Original MK3 Interior:



another happy customer!

Leave a Reply

Your email address will not be published. Required fields are marked *